1. Measurement Capability :
| Sl. No. | Parameter | Range / Accuracy / Specifications |
|---|---|---|
|
1 |
DC Voltage |
1µV to 1000 V, 1.26% to 2 ppm 1kV to 15 kV , 0.46% |
|
2 |
AC Voltage |
a) 10 Hz to 1 kHz 1 mV to 100 V , 550 ppm to 30 ppm b) 40 Hz to 20 kHz 100 V to 1000 V , 30 ppm to 120 ppm c) 1 kHz to 100 kHz 1mV to 600 V, 980 ppm to 25 ppm d) 100 kHz to 1 MHz 1mV to 100 mV , 0.34% to 650 ppm 100 mV to 20 V , 580 ppm to 57 ppm e) 50 Hz 1 kV to 25 kV , 1.3% to 3.3% |
|
3 |
DC Current |
1nA to 10 A, 150 ppm to 9 ppm 10 A to 100 A , 25 ppm to 80 ppm |
|
4 |
AC Current |
a) 10 Hz to 1 kHz 10 µA to 10 mA , 250 ppm to 40 ppm b) 10 Hz to 10 kHz 10 mA to 10 A , 50 ppm to 130 ppm c) 10 Hz to 5 kHz 10 A to 20 A, 100 ppm to 200 ppm d) 50 Hz 20 A to 50 A, 125 ppm |
|
5 |
DC Resistance |
1 µΩ to 1 MΩ , 100 ppm to 2 ppm 1 MΩ to 1 GΩ, 3 ppm to 240 ppm 1 GΩ to 100 TΩ , 240 ppm to 0.35% |
|
6 |
AC Resistance |
a) 100Hz to 1 kHz 0.01 Ω to 0.10 Ω, 460 ppm to 520 ppm b) 1 kHz 1 Ω to 10 kΩ, 65 ppm to 60 ppm |
|
7 |
Inductance |
@ 1kHz 10 µH to 100 mH, 1.25% to 0.015% 100 mH to 10 H , 0.015% to 0.032% |
|
8 |
Capacitance |
a) 1 kHz 1 pF to 1µF , 5 ppm to 150 ppm 1 µF to 1 F , 150 ppm to 750 ppm b) 100 Hz 1 µF to 1 F , 200 ppm to 0.080 % |
|
9 |
AC Power Active , I Phase 0.2 PF-UPF |
@50 Hz, 0.6W to 12 kW, 120 ppm to 576 ppm |
|
10 |
AC Power Active, 3 Phase,UPF,0.8 PF, 0.5 PF, 0.2 PF |
@50 Hz, 3.6W to 36 kW, 0.11% to 0.27% |
|
11 |
DC Power |
10 mW to 20 kW , 0.005% to 0.012% |
|
12 |
Power Factor |
0.2 PF to 1 PF , 135 ppm |
|
13 |
Phase Angle |
0 to ± 180 deg, 0.06 deg |
|
14 |
Temperature Simulation |
a) Thermocouple Types K, J, B,S,T,R,N,E,C,L,U -250 ºC to 2300 ºC, 0.005 ºC to 0.15 ºC b) RTD-Pt 385, 100 Ω , 10 Ω, 1 kΩ -200 ºC to 800 ºC , 0.001 ºC to 0.033 ºC |
|
15 |
Frequency |
10 mHz to 1 GHz , 0.065 ppm to 0.0002 ppm 1 GHz to 40 GHz , 0.00004 to 0.00007 ppm |
|
16 |
RF Power |
a) 1MHz to 10 MHz 13 dBm to -30 dBm , 4.1% b) 10 MHz to 18 GHz 13 dBm to -90 dBm, 5.5% |
|
17 |
RF Attenuation |
10 MHz to 18 GHz 1 dB to 60 dB , 0.15 dB to 0.40dB |
|
18 |
Amplitude Modulation CW : 1GHz, Rate:1kHz |
Modulation Depth 10 % to 90 % , 3.75 % |
|
19 |
Frequency Modulation CW : 1GHz , Rate 1kHz |
Frequency deviation 10 kHz to 200 kHz , 3% |
|
20 |
Total Harmonic Distortion (THD) 10kHz to 150kHz @ 50 Ω (sine wave source) Harmonics (n=4) |
THD Range 0.01 % to 100 % of Fundamental , 6.0 % to 11 % |
|
21 |
Reflection Coefficient (P) |
10 MHz to 18 GHz 0.020 to 0.33 (VSWR 1.05 to 2.0) ,0.02 to 0.05LU |
|
22 |
Time Interval |
100 ms to 10000 s , 1 ppm |
|
23 |
Electrostatic Discharge (±2kV to ±8kV) a)Rise time b) Peak Current c) Current at 30ns d) Current at 60ns |
a)0.8 ns ±25% , ±6.55% b)7.5A to 30A ±15% , ±3.3% c)4A to 16A±30% , ± 3.38% d)2A-8A±30% , ±3.33% |
|
24 |
Electrical Fast Transients (50Ω &1kΩ) at ±250V to ±4kV a) Rise Time b)Amplitude c) Pulse width d) Repetition frequency e)Burst Period f)Burst duration |
a) 5ns±30%, 4.96% b) (250- 4000V)±10%@50Ω (250- 4000V)±20%@1kΩ, 4.79% c) 50ns ±30%(50Ω) & 50ns -15ns +100ns (1kΩ) ,4.93% d) 5 kHz/100kHz)±20%, 5.00% e) 300 ms±20% , 0.02% f) 15 ms±20%@5kHz & 0.75 ms±20%@ 100 kHz , 0.07% |
|
25 |
Impulse Voltage ±(500V to 10kV) a) Amplitude: b) Rise Time c) Pulse Width |
a) ±(500V to 10kV) ± 10% , 5.04% b) 1.2µs ±30% , 5.45% c) 50 µs ±20% , 5.04% |
|
26 |
Voltage Dips & Short Interruptions at 230V rms a) Voltage b) Time |
a) 0%,40%,70%,80% of V , 3.74% b) 10ms to 5000mS , 1.037% |
|
27 |
Slow damped Oscillatory wave Generator (250V to 2.5kV) (100kHz and 1MHz) a) Open Circuit voltage b) Voltage rise time
c) Voltage Oscillation Frequency
d) Repetition rate
e) Burst duration
f) Decaying
g) Short circuit current
h)Output impedance |
a) 250V to 2500V ± 10% , 4.1% b) 75ns ± 20% , 4.96%
c) 10µs for 100kHz± 10% , 5% 1µs for 1MHz± 10% d) 25ms for 100kHz± 10% , 1.5% 2.5ms for 1MHz± 10% , 1.5% e) 2s , 1.26%
f) Pk5>50% of Pk1 & Pk10<50% of Pk1 , 4.1% g) 1.25A to 12.5A± 20%, 3.35% h) 200 ohm, 4.01% |
|
28 |
Surge (Continuous Wave Generator Output) ( ±0.5 kV to ± 6kV) a) Voltage Amplitude b) Voltage Front Time c) Voltage Pulse Duration d) Current Amplitude e) Current Front Line f) Current Pulse Duration |
a) 0.5kV to 6 kV ± 10% , 4.1% b) 1.2µs to 10 µs ± 30%, 4.96% c) 50µs to 700 µs ± 20%, 5.04% d) 12.5A to 3000A ± 10%, 3.35% e) 5 µs to 8 µs ± 20%, 4.96% f) 20 µs to 320 µs ± 20%, 5.04% |
|
29 |
Surge (CDN Output) ( ±0.5 kV to ± 6kV) a) Voltage Amplitude b) Voltage Front Time c) Voltage Pulse Duration d) Current Amplitude e) Current Front Line f) Current Pulse Width |
a) 0.5kV to 6 kV ± 10% , 4.1% b) 1.2µs to 8 µs ± 30%, 4.96% a) 50µs ± 20%(L-L), 5.04% 50µs (+20% to -50%) (L-PE) , 5.04% 38 µs to 250 µs ± 30% (CDN for unsym./sym. lines) , 5.04% b) 41.7A to 3000A ± 10%, 3.35% 12.5A to 218 A ± 20% (CDN for sym./unsym. lines) , 3.35% c) 8 µs ± 20% (L-L), 4.96% 2.5 µs ± 30% (L-PE) , 4.96% 1.3 µs to 3.2 µs ± 30%(CDN for sym./unsym. lines), 4.96% d) 20 µs ±20% (L-L), 5.04% 25 µs ±30% (L-PE), 5.04% 13 µs to 250 µs ±30% (CDN for sym./unsym. lines) , 5.04% |
Oscilloscope, LCR Meter, DMM, Power/Energy Meter, Multi Function Calibrator, Electronic Load, Reference DMM, Standard Resistors, Inductors & Capacitors, Micro/ Milli Ohm Meters, Transformer winding Resistance Meters, Fuel Quantity Calibrator, Reference Cell, HV Testers/Probes/Meter, RF Power Meter, Function/Signal Generator, Spectrum Analyzer, Frequency Counter, Attenuators, EMI/EMC Equipments, Timers, Voltage dips and Interruptions, ESD/EFT/Impulse/Damped Oscillatory Wave Generator,
